固體推進劑中混摻鐵粉對脈衝式電漿推進器整體性能的影響

碩士論文
2025 - 02

碩士生: 楊宗穎

畢業年月: 2025年2月

論文名稱: 固體推進劑中混摻鐵粉對脈衝式電漿推進器整體性能的影響 / Effect of iron powder blending in solid propellant on the overall performance of pulsed plasma thruster

中文摘要:

脈衝式電漿推進器(PPT)因體積小、結構簡單且推力精確,廣泛用於立方衛星,但效率與推力功率比偏低。本研究提出摻入5至20 wt%鐵粉的PMMA金屬複合推進劑(PMMA@Fe),取代傳統PTFE。鐵粉降低電漿阻抗並提高放電電流,使衝量比純PMMA提升62.5%(80.3增至131.9 μN·s),推力功率比提升63.5%(17.8增至29.3 μN/J);燒蝕率由4.5增至5 wt% Fe的8.1 μg/發後趨於平穩。然而鐵含量達20 wt%以上會造成放電不規則與碳—金屬沉積,壽命限於6,000次。PMMA@15 wt%Fe為最佳配方,推力效率19.6%、比衝1,426 s。

英文摘要:

Pulsed plasma thrusters (PPTs) are widely used in CubeSats for their compact size, simplicity, and precise thrust, but their efficiency and thrust-to-power ratio are limited. This thesis proposes a PMMA-based metal-composite propellant (PMMA@Fe) doped with 5 to 20 wt% iron powder as an alternative to PTFE. Iron lowers plasma impedance and raises discharge current, improving impulse bit by 62.5% (80.3 to 131.9 μN·s) and thrust-to-power ratio by 63.5% (17.8 to 29.3 μN/J) over pure PMMA. Ablation rises from 4.5 to 8.1 μg/shot at 5 wt% Fe and then plateaus, and plasma generation grows by 50%. However, iron at 20 wt% or more causes irregular discharges and carbon-metal deposition, limiting lifetime to 6,000 discharges. PMMA@15 wt%Fe is optimal, with 19.6% thrust efficiency and a specific impulse of 1,426 s.

研究成員

  • 楊宗穎

指導老師

  • 李約亨

Back To Top